Select

Why SELECT it:
For effective lubrication and protection of all types of bearings, slides, bushes, linkages and pins.

• Temperature range -50°C to +200°C
• Multi-purpose grease, fortified with PTFE, for an extensive range of applications
• Also makes an ideal electrical contact grease
• Particularly suitable for high-speed bearings and those subjected to extremes of temperature
• Protects against corrosion in humid, damp and wet conditions

Why SELECT it:
To lubricate and protect all types of ball, roller and plain bearings in high load operations.

• Temperature range -30°C to +160°C
• Weld load = >800kg
• Protects against corrosion in humid, damp and wet conditions
• Outstanding film strength
  • the grease stays where it is needed

Why SELECT it:
To protect and maximise the life of all types of chains even in extreme conditions

• Ensures maximum penetration, lubrication and corrosion protection
• Full penetration into the links and pins of the chain
• Good adhesion and water resistant
  • reduces ‘throw off’, dripping and protects in wet or humid environments.
• For high load applications including forklift trucks choose: CHAINGUARD Hi-Load Spray

Why SELECT it:
Protects against pick up and seizure issues even in extreme adverse conditions

• Temperature range -50°C to +1100°C
• Lubricates, protects and eases dismantling
• Particularly suited to extreme wet conditions even when submerged in seawater environments

Why SELECT it:
To penetrate and release seized or corroded fasteners even after prolonged periods of seizure

• Provides efficient loosening of fasteners when seized due to rust, scale, dirt, grime etc.
• Corrosion inhibitors provide a protective film against further attack after use
• Fast acting formulation so minimizes time and effort

Why SELECT it:
To efficiently remove all general grime, grease, dirt and other workplace contamination.

• NSF K1 registered – suitable for use on food processing equipment and utensils.
• Dries rapidly and completely leaving a residue free surface.
• Solvent based

Why SELECT it:
To efficiently clean work surfaces.

• The foam will cling to vertical surfaces, preventing contamination by run-off or dripping.
• NSF A1 registered – suitable for use in and around food processing areas.
• Foaming action ensures long contact time for effective cleaning, even on vertical surfaces.
• Water based

• For indoor corrosion protection of components such as bearings, gears, pressings and any machined metal product
• Flexible film – does not chip or break
• Protects against corrosion caused by moisture or damp atmospheres
• Silicone free

Why SELECT it:
To provide wear resistance and lubrication to sliding mechanisms; plain bearings, pins, cams and slides where a wet lubricant cannot be tolerated.

• Can also be used as a dry film chain lubricant where wet films cannot be tolerated
• Temperature range -50°C to +450°C
• Resistant to high loads (up to 7,000kg/cm2)