Knowledge centre Case Studies
Gypsum production – dryer system chains
A global leader in the gypsum board industry operates a high-temperature dryer chain system at its Bangalore facility. The application involves continuous lubrication of four dryer chains (total length 800 m) running through 100 m ovens at a constant temperature of 150°C. The chains operate in a dusty environment and are lubricated via a spray/drip system, with current lubricant consumption of approximately 8 litres per day.
PROBLEM OVERVIEW
The customer was using a competitor high-temperature chain oil for dryer chain lubrication but experienced significant dust accumulation on the chains. The combination of high operating temperatures and a dusty production environment caused lubricant residue and contaminants to build up on the chain surfaces, potentially increasing wear, reducing lubrication efficiency, and creating higher maintenance requirements. The customer sought a lubricant solution that can provide effective high-temperature chain protection while minimising deposit and dust formation.
IMAGES – BEFORE CHANGE TO ROCOL

ROCOL RECOMMENDATION: FLO-LINE 100
ROCOL® FLO-LINE 100 is a new generation lubricant specially designed for the lubrication of chain systems on plaster board manufacturing lines. ROCOL FLO-LINE 100 is formulated from a combination of synthetic esters and a special antioxidant package which ensures the highest performance in terms of thermal stability, low evaporation loss and minimal deposit formation.
FEATURES AND BENEFITS
- ROCOL FLO-LINE 100 has a special antioxidant combination that gives a longer wet film life with lower deposit and varnish formation.
- ROCOL FLO-LINE 100 demonstrates a low viscosity increase at elevated temperatures eliminating the risk of tube blockage on automatic lubrication systems.
- The superior anti-wear properties of ROCOL FLO-LINE 100 minimises frictional heat generation on chain systems, improving chain system efficiency.
- ROCOL FLO-LINE 100 penetrates into the links and pins providing high-performance lubrication in the highest potential wear areas.
- The excellent frictional properties give reduced power consumption on chain drive units.
- ROCOL FLO-LINE 100 has a very low evaporation rate giving good economy in use.
- Low fuming provides a clean working environment.
- Operating temperature range of 10° C to 250° C.
IMAGES – AFTER CHANGE TO ROCOL

BENEFITS AND COST SAVINGS
Performance of FLO-LINE 100 was found to be better than the competitor chain oil
- Excellent chain protection due to superior hydrodynamic lubricity.
- Continuous long term wet lubrication film observed.
- No carbon or dust found on chain.
- Less consumption than oks 352/2, due to low evaporative loss
- Reliability of oil on chain links for longer period; and thus, other losses problems with lubrication are eliminated.
- Lubrication oil consumption reduced by 50%.
- Consumption cost reduced around by 15%.
New generation lubricant specially designed for the lubrication of chain systems on plaster board manufacturing lines.
